Update Apr 2008 Webmaster Donald Roberts

T-15 weasel # 186 getting ready for restorations.	PHOTO 1: Laser cut plates to go on outer band for Type 3 track.
PHOTO 2: The photo shows the splice area where the outer bands are overlapped and the inner bands are butted up on the same grouser plate. The Type 2 track is shown with the plates being used on the outer bands.	PHOTO 3: The Type 2 cross bars are zinc plated, the Type 3 cross bars are powder coated black. Shown in the picture is a totally rebuilt Type 2 track, with 56 grouser plates on the 2-1/4" - 4-1/2" grouser pitch.
PHOTO 4: In this picture, we are using standard hex bolt heads that do touch the edge of the drive sprocket. A button headed bolt will give a little more clearance. As of March 10, 2005, I have put about 50 miles on this track, and I am very well pleased. Runs smooth, with very little snow buildup.	PHOTO 5: The best way that I found to splice a completely "broken" track, using 2 ratcheting straps to suck the two parts together.
PHOTO 6:   PHOTO 7:	PHOTO 8:   PHOTO 9:
I wanted to send you some pictures of the new inner and outer bands on the tracks I bought from you a while back.  They have been on the weasel for about a year now or so, and the are holding up great. Didn’t drove a whole lot of miles, but playing a little with it, sharp corners, no problems… great machine. I made a little compilation on YouTube about the restoration of my weasel. Here is the link: http://nl.youtube.com/watch?v=uePEC0OTuY8 Regards and greetings out of wet Holland, -- Ton Krowinkel h;;k

OSS T-15 training video   http://www.realmilitaryflix.com/public/441.cfm

M29-C properly bent Splash extension, made from gavalume, paint-able and corrosion resistant. $70.00

Proper carb kits for the weasel $35.00

Outer band for Type 2 as shown below. $500.00 per 2 strips to do one track. This includes cross bars.

Outer band for Type 3 per 2 strips to do one track. $500.00. This includes cross bars.

Outer band material is 1/2 " thick and is 700 foot pound test material. This belting is new and has been used for years in the AG industry. Inner bands are 3/4" in thickness. $300.00 for 2 strips to do one track. Inner bands are typically used rock belt that has been hand selected. New material is very expensive. Bolts for bands are more easily purchased locally, rather than ship the additional weight.

Banding installed on a Type 2 track. - - - - - - - - - - - - - - - Inner banded "butted" together, outer bands overlapped.

M-105 trailer, fresh from DRMO, complete with side racks, all electrical cables, great tires. $500.00

Set of 2 - 20" deep dish 10-hole combat rims. These must have come off of some huge WW-II - 5 ton truck. They had an old set of 11:00 12 ply tires on them. $150.00 for the set.